Home > PAINT & SUNDRIES > PAINT > PRIMERS & SEALERS
Choose a sub category:
SPRAY STAIN KILLERS PRIMERS - OIL BASED SHELLAC BASED & ALCOHOL BASED
PRIMERS - WATER BASED WOOD PROTECTORS WOOD PRESERVATIVES
MULTI-SURFACE SEALERS MISC PRIMERS/SEALERS
Sort By:
1 2 3 ... 7
Zinsser 2008 Bulls Eye 1-2-3 Primer/Sealer WaterSeal 10100 Multi-Surface Waterproofer Thompsons TH.010501-18 Sports Seal Fabric Protector
Zinsser Primer, Series: Bulls-Eye 1-2-3, 13 oz, Aerosol Can, Water Base, Styrene Acrylate Copolymer Resin, Liquid, White, Flat, Solvent Like Odor/Scent, 10 - 12 sq-ft/Can Practical Coverage At Recommended DFT Coverage, 30 min to Touch, 1 hr to Recoat, 7 Days Full Hardness Drying Time, Application Method: Spray, -156 Deg F Flash Point, 502 g/l VOC, 50 - 90 Deg F, Suitable For Use With: Walls, Ceilings, Doors, Trim, Fascia, Soffits, Foundations, Railings and Related Paintable Surfaces, For Interior and Exterior Applications Provides proven waterproofing protection for wood, concrete and brick.  Ideal for small exterior projects, such as terra cotta planters, birdhouses and mailbox posts. Provides long-lasting, maximum strength waterproofing protection for outdoor sporting, camping, hunting, and boating surfaces. Penetrates below the surface to protect against moisture damage without leaving surfaces discolored, stiff or sticky. Repels spills and stains. Allows fabric to breathe. Covers approximately 60 sq ft per can. Coverage depends on the condition and porosity of the surface.
Kilz 10004 Stain Killer Primer Sealer Rustoleum Cover-Stain Primer Sealer Zinsser 3688 Covers Up Primer/Sealer
Kilz Primer Sealer, Stain Killer, Kilz, 13 oz Capacity, Aerosol Can Packing, Oil Base, White, Mild Odor/Scent, Application Method: Spray, -156 deg F Flash Point, For Interior Use Rustoleum Primer Sealer, Series: Cover-Stain, 13 oz Capacity, Oil Base, VT Styrenated Modified Alkyd Resin, Liquid, White, Solvent Odor/Scent, 400 - 450 sq-ft Coverage, 30 min Drying Time, -105 deg C Flash Point, 525 g/l VOC, 40 - 80 deg F, For Cedar and Redwood Zinsser Ceiling Paint and Primer, Series: COVERS UP, 13 oz, Aerosol Can, Solvent Base, Acrylic Resin, Liquid, White, Flat, Solvent Like Odor/Scent, 12 - 15 sq-ft/Can Practical Coverage At Recommended DFT Coverage, 30 min to Touch, 1 hr to Recoat Drying Time, Application Method: Spray, -156 Deg F Flash Point, 476 g/l VOC, 70 - 80 Deg F, Suitable For Use With: Primed or Previously Painted Ceiling Tiles, Drywall, Cured Plaster, Wood, Aluminum, Iron, Steel and Galvanized Metal and PVC, For Interior and Exterior Applications
Thompsons TH.010502-18 Fabric Seal Fabric Protector SPRAY PRIMER SEALR OIL BS 16OZ Kilz Upshot 10007 Primer Sealer
Provides maximum strength waterproofing protection for fabric surfaces such as patio cushions, pillows and umbrellas. Contains UV inhibitors in order to resist color fading caused by the sun. Penetrates below the surface to protect against moisture damage without leaving surfaces discolored, stiff or sticky. Repels spills and stains. Allows fabric to breathe. Covers approximately 60 sq ft per can. Coverage depends on the condition and porosity of the surface. Kilz Upshot Primer Sealer, Kilz, Upshot, 10 oz Capacity, Can Packing, Oil Base, 18 sq-ft Coverage, 15 min Drying Time, -156 deg F Flash Point, Titanium Dioxide, Talc, Magnesium Silicate Hydrate, Aliphatic Hydrocarbon, Rutile, Silicate, Mica Composition, For Eye Protection, Blocking Most Ceiling Stains Like Water, Smoke and Grease
Rustoleum 290971 Bulls Eye ? 123 Plus Primer/Sealer Masterchem 10444 Kilz Odorless Primer/Sealer PRIMER SEALR OBS ODRLESS SPRAY
Zinsser Primer, Series: Bulls-Eye 1-2-3?, All-Purpose, 13 oz, Aerosol Can, Water Base, Acrylic Modified Alkyd Resin, Liquid, Gray, Smooth, Solvent Like Odor/Scent, 10-12 sq-ft/Can Coverage, 30 min Drying Time, Application Method: Spray, -20 Deg C Flash Point, 480 g/l VOC, 50 - 90 Deg F, Suitable For Use With: New or Previously Painted Drywall, Concrete, Wood, Masonry, Metal and Glossy or Difficult Surfaces KILZ Odorless Primer Sealer, 13 oz, Aerosol Can, Oil Base, White, Solvent Odor/Scent, 20 - 25 sq-ft Coverage, Application Method: Spray, -156 Deg F Flash Point, 60 % VOC, 50 - 90 Deg F, For Offices, Schools, Dining Areas, Apartments and Other Areas Zinsser Stain Primer, 13 oz, Aerosol Can, Oil Base, Alkyd Resin, Liquid, White, Solvent Like Odor/Scent, 820 sq-ft/Gal Theoretical Coverage At 1 mil DFT, 350 - 400 sq-ft/Gal Practical Coverage At Recommended DFT Coverage, 30 min to Touch, 2 hr to Recoat, 7 hr to Full Hardness Drying Time, Application Method: Spray, 106 Deg F Flash Point, 476 g/l VOC, 40 - 90 Deg F, Suitable For Use With: All Types Of Bare or Painted Interior Surfaces Including Wood, Drywall, Plaster, Concrete, Stucco and Masonry Surfaces, For Residential and Commercial Property Maintenance
WaterSeal TH.024104-14 Multi-Surface Waterproofer Kilz 20002 Primer Masterchem 10002 Extra Strength Stain Killer Primer Sealer
Use on decks & fences, brick patios, concrete driveways, exterior surfaces. Use when mildew/biological factors are not a problem. Prevents water damage. Beads & waterproofs. Allows wood to gray naturally. Actual coverage will vary considerably due to porosity of surface materials. Dries clear. Kilz Premium Premium Primer, Kilz Premium, 1 qt Capacity, 25 g/l VOC, 8.5 - 9.5 pH, Liquid, White, Thick, 300 sq-ft Coverage, 30 min Drying Time, 30 days Functional Cure, Media: Carbon Dioxide, Dry Chemical, Water Fog, Composition: Titanium Dioxide, Water, Silica, Amorphous, Precipitated and Gel, Flammability Rating: 1, Water Base, 50 - 90 deg F Masterchem Primer Sealer, Extra Strength, Stain Killer, Masterchem, 1 qt Capacity, Oil Base, Paste, Almond, Mild Odor/Scent, 26 ft Linear/1/4 in Head Coverage, 1.34 Specific Gravity, 0.14 VOC, 8.5 - 9 pH, 40 - 120 deg F, For Furniture, Drywall, Plaster, Woodwork, Paneling, Glossy Surfaces, Masonry, Brick, and Painted Surfaces
Wolman Classic II Woodlife Wood Preservative Kilz 13002 Primer Rustoleum Cover-Stain Interior/Exterior Primer Sealer
Provides a mildew protection, penetrating preservative protection and water repellent surface protection. Controls warping, splitting, shrinking and swelling of wood. For all above ground structural pressure treated and untreated wood. Paintable and stainable. EPA registered. Covers approximately 150-250 sq. ft. per gallon depending on wood age and species, surface porosity and method of application. Soap and water clean-up. Kilz Premium Premium Primer, Kilz Premium, 1 qt Capacity, 25 g/l VOC, 8.5 - 9.5 pH, Liquid, White, Thick, 300 sq-ft Coverage, 30 min Drying Time, 30 days Functional Cure, Media: Carbon Dioxide, Dry Chemical, Water Fog, Composition: Titanium Dioxide, Water, Silica, Amorphous, Precipitated and Gel, Flammability Rating: 1, Water Base, 50 - 90 deg F Rustoleum Primer Sealer, Interior/Exterior, Series: Cover-Stain, 1 qt Capacity, Oil Base, VT Styrenated Modified Alkyd Resin, Liquid, White, Flat/Matte, Mild Odor/Scent, 30 min Drying Time, Application Method: Spray, Roller or Brush, 1.308 Specific Gravity, 83 deg F Flash Point, 425 g/l VOC, 40 - 80 deg F, MPI No 5 Certified, For Cedar and Redwood
Deft 015-13 Lacquer Sanding Sealer Zinsser 02004 Bulls Eye 1-2-3 Primer/Sealer PRIMER SEALR SHELLAC BS 13OZ
Formulated to precede the application of Clear Wood Finish Brushing Lacquer. The sanding sealer serves as the base coat and is designed to seal and protect the surface. Ideal for stained or bare wood surfaces, including furniture, floors, cabinets, doors and trim. Seals the wood pores which allows the top coat go further. Zinsser Primer Sealer, Series: Bulls-Eye 1-2-3, 1 qt, Water Base, Styrenated Acrylic Resin, Liquid, White Emulsion, Acrylic Like Odor/Scent, 545 sq-ft/Gal Theoretical Coverage At 1 mil DFT, 450 sq-ft/Gal Non-Porous and 350 sq-ft/Gal Porous Surfaces For Practical Coverage At Recommended DFT Coverage, 35 min to Touch, 1 hr to Recoat, 7 Days Full Hardness Drying Time, Application Method: Natural or Synthetic Bristle Brush, Roller, Pad or Sprayer, 1.26 Specific Gravity, >200 Deg F Flash Point, <100 g/l VOC, 9 - 10 pH, 50 - 90 Deg F, Suitable For Use With: Walls, Ceilings, Doors, Trim, Fascia, Soffits, Foundations, Railings and Related Paintable Surfaces, For Interior and Exterior Applications Zinsser Primer Sealer, Series: B-I-N, 13 oz, Aerosol Can, Shellac Resin, Liquid, White, Solvent Like Odor/Scent, 10 - 12 sq-ft/Can Practical Coverage At Recommended DFT Coverage, 15 min to Touch, 30 min to Recoat Drying Time, Application Method: Spray, -156 Deg F Flash Point, 551 g/l VOC, 70 Deg F, Suitable For Use With: Ceramic Tile, Glass, Metal, Plastic and Hardboard, For Interior Applications
Drylok 27512 Latex Based Masonry Waterproofer Zinsser 249019 Bulls Eye Zero Primer/Sealer California 50600-4 Primer/Sealer
Formulated to waterproof above or below grade masonry walls, cinder and concrete blocks, stucco, brick, retaining walls, basement, and foundations. Tintable. Low Odor. Non-flammable. Resists 10 psi water pressure. Apply with brush and/or roller. Complies with all current VOC requirements. Passes performance requirements of Fed. Spec. TT-P-1411-A. Covers 75 to 125 sq. ft per gallon depending on surface porosity. Zinsser Primer Sealer, Series: Bulls Eye Zero, 1 qt, Water Base, Acrylic Resin, Liquid, White, Mild Odor/Scent, 400 sq-ft Coverage, 30 - 45 min to Touch, 1 hr to Recoat Drying Time, 1.273 Specific Gravity, >200 deg F Flash Point, 0 VOC, 50 - 85 deg F, Suitable For Use With: Synthetic Bristle Brush, Roller or Airless Sprayer FixAll Universal Primer, Series: 50600, 1 qt, Water Base, 100 % Acrylic Latex Resin, Viscous Liquid, White, Very Slight Odor/Scent, 300 - 350 sq-ft/Gal Smooth Surface, 175 - 225 sq-ft/Gal Porous Surface Coverage, 1/2 hr to Touch, 4 hr to Handle, 2 hr to Recoat Drying Time, Application Method: Synthetic, Nylon or Polyester Brush, Roller, Airless Spray, 100 g/l VOC, 8.5 pH, < 50 Deg F, Suitable For Use With: Wallboard  Plaster, Sheetrock, Masonry, Wood, Concrete, Galvanized Metal, Plastic Laminates, Vinyl Wall Coverings, Under Wall Coverings As Well As Previously Painted Surfaces, Standards: WHMIS Hazard Class
Zinsser 249933 Bulls Eye - 123 Plus Primer/Sealer Kilz 10042 Interior Primer Sealer Zinsser 249727 Smart Prime Primer/Sealer
Zinsser Primer Sealer, Series: Bulls Eye 1-2-3 Plus, 1 qt, Can Packing, Water Base, Acrylic Resin, Liquid, White, Mild Odor/Scent, 400 sq-ft Coverage, 30 min to Touch, 1 hr to Recoat Drying Time, 1.317 Specific Gravity, >200 deg F Flash Point, 5 g/l VOC, 50 - 90 deg F, Suitable For Use With: Synthetic Bristle Brush, Roller or Airless Sprayer Kilz Primer Sealer, Interior, Series: 10042, 1 qt Capacity, Oil Base, Acrylic Resin, Liquid, White, Odorless Odor/Scent, 300 - 400 sq-ft Coverage, 30 min Drying Time, Application Method: Airless Spray, Brush and Roller, 102 deg F Flash Point, 331 g/l VOC, 50 - 90 deg F, For Brick?, Painted Metal, Properly Prepared Glossy Surfaces, Drywall Paneling Zinsser Primer Sealer, Series: Smart Prime, 1 qt, Water Base, Acrylic Resin, Liquid, White, Mild Odor/Scent, 400 sq-ft Coverage, 30 min to Touch, 1 hr to Recoat Drying Time, 1.317 Specific Gravity, >200 deg F Flash Point, 5 g/l VOC, 50 - 90 deg F, Suitable For Use With: Synthetic Bristle Brush, Roller or Airless Sprayer, For Interior/Exterior Use
Wolman Coppercoat Woodlife Wood Preservative Majic 8-1091 Barricade Primer and Paint SEALER SANDING LACQUER QUART
Prevents attack from termites and other wood boring insects while it protects against rot and decay. Inhibits mold, mildew and staining, and staining fungi. EPA registered, insecticidal preservative prohibits rot and decay. Anti-wicking property resists moisture absorption controls warping, swelling, and end checking. Imparts a transparent green color that naturally fades over time. Paintable and stainable. Easy soap and water clean up. Covers approximately 200 to 350 sq. ft. per gallon. Majic Barricade Primer and Paint, Series: 8-1091, Liquid, White, Flat, 1 gal Capacity, Can Packing, Vinyl Acrylic Latex Resin, Water Base, 300 sq-ft/gal Coverage, 50 deg F, >200 deg F Flash Point, 100 g/l VOC, 9.2 pH, 1.2196 Specific Gravity, Typical Latex Odor/Scent, Application Method: Brush, Roller, For Drywall Formulated to work as a base coat under Minwax Clear Brushing Lacquer. Easy to sand. Dries quickly. Seals the wood in just one coat. Use on woodwork, cabinets, furniture, doors, accessories. Covers up to 125 sq ft per quart.
   
 
1 2 3 ... 7